English
PRECAUTIONS ON USING ROTARY HAMMER
1.Wear ear protections
Exposure to noise can cause hearing loss.
2.Do not touch the bit during or immediately after operation. The bit becomes very hot during operation and could cause serious burns.
3.Before starting to break, chip or drill into a wall, floor or ceiling, thoroughly confirm that such items as electric cables or conduits are not buried inside.
4.Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
5.Always hold the body handle and side handle of the power tool firmly. Otherwise the counterforce produced may result in inaccurate and even dangerous operation.
6.Wear a dust mask
Do not inhale the harmful dusts generated in drilling or chiseling operation. The dust can endanger the health of yourself and bystanders.
SPECIFICATIONS
Voltage (by areas)* | (110V, 115V, 120V, 127V, 220V, 230V, 240V) | |
Power input |
| 950 W* |
Capacity | Drill | bit: 40 mm |
| Core bit: 105 mm | |
No load speed | 240 | – 480 |
1320 | – 2650 | |
Weight (without cord, side handle) |
| 6.8 kg |
|
|
|
*Be sure to check the nameplate on product as it is subject to change by areas.
STANDARD ACCESSORIES |
| |
(1) | Case | 1 |
(2) | Side Handle | 1 |
(3) | Stopper | 1 |
(4) | Hammer Grease A | 1 |
Standard accessories are subject to change without | ||
notice. |
| |
2.Anchor hole drilling (Rotation + Hammering) Drill bit (Taper shank)
(3)Cotter
OPTIONAL ACCESSORIES (sold separately)
1.
(1) Drill bit (SDS max shank)
Outer diameter (mm) | Overall length (mm) | ||
16 | 340, | 540 | |
19 | |||
|
| ||
22 | 320, | 520 | |
25 | |||
|
| ||
28 |
|
| |
32 | 370, | 570 | |
38 | |||
|
| ||
40 |
|
| |
|
|
| |
(1) Drill bit (taper shank) |
| (2) Taper shank |
| |||||||
| External dia.: 11, | 12.3, | 12.7, | adapter |
|
| ||||
|
|
|
| 14.3, 14.5, | (SDS max shank) | |||||
|
|
|
| 17.5 mm |
|
|
|
| ||
|
|
|
|
|
|
|
|
|
| |
| Taper shank | Application drill bit |
|
|
| |||||
| adapter |
|
|
| ||||||
|
|
|
|
|
|
|
| |||
| Morse taper | Drill bit | (taper | shank) |
|
| ||||
| (No. | 1) | 11, | 12.3, | 12.7, | 14.3, | 14.5, | 17.5 | mm | |
|
|
|
|
|
|
| ||||
|
|
|
|
|
| |||||
|
| Adapter for |
|
|
| |||||
|
| (1) Drill bit |
|
| (2) Adapter for | |||||
|
|
|
| shank bit |
|
| ||||
|
|
|
|
|
|
| (SDS max shank) | |||
3. Large dia. hole boring (Rotation + Striking)
(Guide | (1) Center | (2) Core | (3) Core bit shank |
plate) | pin | bit | (SDS max |
|
|
| shank) |
(1) Center pin
⬤Applied to core bits from 38 mm to 105 mm
⬤Applied to core bits 32 mm and 35 mm
6
