Hitachi DV-DS81E, DV-DS161E Rear Panel, Connecting to the Aerial, RF coaxial connection

Hookup and Settings

Rear Panel

a b c d e f g h i j

k l m n

aAERIAL

Connect the aerial to this terminal.

bAUDIO OUT (Left/Right) Connect to a TV with audio inputs.

cVIDEO OUT

Connect to a TV with video inputs.

dCOMPONENT VIDEO OUT/PROGRESSIVE SCAN (Y Pb Pr)

Connect to a TV with Y Pb Pr inputs.

eVIDEO OUTPUT Switch

Select either COMPONENT VIDEO OUT or RGB signal of EURO AV1 AUDIO/VIDEO terminal depending on how you connect the recorder to the TV.

fEURO AV 1 AUDIO/VIDEO Connect to a TV with SCART jack.

gEURO AV 2 DECODER

Connect the audio/video output of an external source (Pay-TV decoder, Set Top Box, VCR, etc.).

hOPTICAL (Digital audio out jack) Connect to digital (optical) audio equipment.

i Cooling fan

j AC Power Cord

Plug into the power source.

kRF. OUT

Passes the signal from the AERIAL to your TV/monitor

lAUDIO IN 3 (Left/Right)

Connect the audio output of an external source (Audio system, TV/Monitor, VCR, Camcorder).

mVIDEO IN 3

Connect the video output of an external source (Audio system, TV/Monitor, VCR, Camcorder).

nCOAXIAL (Digital audio out jack)

Connect to digital (coaxial) audio equipment.

Connecting to the Aerial

Remove the aerial cable plug from your TV set and insert it into the aerial socket at the back of the recorder. Plug one end of the aerial cable into the TV socket on the recorder and the other end into the aeri- al input socket on your TV set.

RF coaxial connection

Connect the RF. OUT jack on the recorder to the aeri- al input jack on the TV using the 75-ohm Coaxial Cable supplied (R). The RF. OUT jack passes the sig- nal through from the AERIAL jack.

Aerial

Rear of TV

	SCART INPUT
ANTENNA	AUDIO INPUT		VIDEO
INPUT			INPUT
	L	R

R

Rear of the recorder

14