Disc Menu/Audio/Subtitle
•[Original]Refers to the original language in which the disc was recorded.
•[Other] To select another language, press number buttons then ENTER to enter the corresponding
•[Off](for Disc Subtitle) : Turn off Subtitle.
Audio Settings
Each DVD disc has a variety of audio output options. Set the recorder’s Audio Output according to the type of audio system you use.
Dolby Digital / DTS / MPEG
•[Bitstream]: Select “Bitstream” if you connect the recorder’s DIGITAL AUDIO OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder.
•[PCM] (for Dolby Digital / MPEG): Select when con- nected to a
•[Off] (for DTS): If you select “Off”, the DTS signal is not output through the DIGITAL AUDIO OUT jack.
Note:
If the audio format of the digital output does not match the capabilities of your receiver, the receiver will pro- duce a strong, distorted sound or no sound at all.
Sampling Frequency
If your receiver or amplifier is NOT capable of handling 96 kHz signals, select [48 kHz]. When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling
96 kHz signals, select [96 kHz]. When this choice is made, this unit will pass each type of signal through without any further processing.
DRC (Dynamic Range Control)
With the DVD format, you can hear a program’s soundtrack in the most accurate and realistic presen- tation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clari- ty of sound. Set DRC to [ON] for this effect.
Vocal
Set Vocal to [ON] only when a
Hookup and Settings
23
