Connecting to an Amplifier
Rear of the recorder
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic
Connect the Left and Right AUDIO OUT jacks on the recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A).
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a
1.Connect one of the recorder’s DIGITAL AUDIO OUT jacks (OPTICAL O or COAXIAL X) to the cor- responding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.
2.You will need to activate the recorder’s digital out- put. (See “Audio Settings” on page 23).
Digital Multi-channel sound
A digital
Caution:
Due to the DTS Licensing agreement, the digital out- put will be in DTS digital out when DTS audio stream is selected.
Notes:
–The audio format is set to [BitStream] at the factory (default) (page 23).
If your amplifier is not compatible with Dolby Digital, MPEG 2, or DTS, no sound will be heard: In such cases, choose [PCM].
–Six Channel Digital Surround Sound via digital con- nection can only be obtained if your receiver is equipped with a Digital
–To see the audio format of the current DVD in the
–This recorder does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio outputs.
A | X | O |
L | R | COAXIAL | OPTICAL |
AUDIO INPUT | DIGITAL INPUT | DIGITAL INPUT | |
Amplifier (Receiver)
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
16
