H9450UD(EN).qx33 03.1.22 7:19 PM Page 20
RECORDING FUNCTION
VCR
It may be UNLAWFUL to record copyrighted material without the consent of the copyright owner.
Accidental Erasure Prevention
To prevent accidental recording on a recorded cassette, remove its record safety tab. To record on it later, cover the hole with cellophane tape.
Before recording, make sure:
¡The desired channel is selected by pressing Number on the remote control or CHANNEL (o/p). (If you connected the VCR to a cable box or satellite box as in "DVD/VCR TO TV CONNECTION" on page 13, select channel 3 on your TV. Then, select the channel you want to record with the cable box or satellite box. In this case, you can ONLY record and view the SAME channel.)
¡If noise appears, change the RF output channel of the VCR to channel 4 by pressing PLAY for 3 seconds during playback. Then select the same channel (CH4) on your TV.
¡There is a tape with a safety tab in the VCR.
¡The desired recording speed is selected in SP (stan- dard play) or SLP (super long play) mode by pressing SPEED on the remote control.
| Tape Speed |
| Recording/Playback Time | ||
| Type of tape | T60 |
| T120 | T160 |
| SP mode | 1 hour |
| 2 hours | |
| SLP mode | 3 hours |
| 6 hours | 8 hours |
¡TV STEREO or SAP is selected.
NORMAL RECORDING
¡If a tape ends during IRT, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER light blinks. (If the DVD power is off, the VCR will become STANDBY status).
¡When IRT is finished , the VCR turns off automati- cally. To use the VCR again, press TIMER on the remote, or STOP/EJECT on the DVD/VCR.
TIMER RECORDING
VCR
You may set the VCR to start recording while you are away. You can set eight programs to record on specific days, daily or weekly within 1 year period.
If you have not yet set the clock, "CLOCK SET" appears. If so, follow the steps [3] and [4] in "CLOCK SET" section on page 18. Then, set the timer record- ing.
1Insert a tape with its safety tab into the DVD/VCR.
2Select main menu by pressing MENU.
3Select "TIMER PROGRAMMING" by press-
ing K or L. Then, press B. | TIMER PROGRAMMING | |
The set up screen is dis- | PROG | 12345678 |
DATE | - | |
played. | START TIME | |
END | TIME |
CHANNEL
REC SPEED
VCR | 4 Set the timer. |
|
1 Begin the recording by pressing RECORD. | ¡To go back one step, press s. |
The REC Light comes on. |
|
¡To temporarily stop recording or to resume it, press PAUSE/STEP. After the VCR has been in Pause mode for 5 minutes, it will stop automatically to protect the tape and the video head from damage.
2Press STOP when the recording is completed.
Note
¡When you wish to watch another program while recording, select desired channel on your TV. If noise appears press VCR/TV.
IRT (Instant Recording Timer)
VCR
This feature allows you to set the recording length simply by pressing REC/IRT on the VCR.
3Press REC/IRT to begin IRT. The REC, TIMER Light comes on. Change the record- ing length by pressing REC/IRT repeatedly.
REC | IRT(0:30) | IRT(1:00)..... |
(Normal recording) |
|
|
1) Set the program number
Program number which is not set up flashes. Press K or L repeatedly for the desired program number. Then, press B.
2) Set the frequency of the recording
For once: Press K or L to point to
"ONCE". |
| PROGRAM NUMBER 4 | |||
For daily (Monday~Friday): Press | K | ONCE |
| ||
DAILY |
| ||||
or L to point to "DAILY". |
|
| |||
| WEEKLY |
| |||
For weekly: Press K or L to point |
|
|
|
| |
to "WEEKLY". |
|
|
|
| |
Then, press B. |
|
|
|
| |
|
|
| |||
3) Set the date |
|
| ONE TIME PROGRAM | ||
|
|
| PROGRAM NUMBER | 4 | |
First, press K or L for the month. |
| DATE | - |
| |
| START TIME - | - - | |||
| END TIME - | - - | |||
Then, press B. Next, press K or |
| CHANNEL | - - |
| |
| REC SPEED | - - |
|
L for the day. Then, press B.
IRT(8:00) | IRT(7:30) | EN |
| – 20 – |
1L25