H9450UD(EN).qx33 03.1.22 7:19 PM
4) Set the start time
First, press K or L for the hour. Then, press B. Next, press K or L
for the minute. Then, press B. And
then, press K or L for AM or PM. Then, press B.
5) Set the end time |
|
| ONE TIME PROGRAM | ||
|
|
| PROGRAM NUMBER 4 | ||
Follow the instructions of | DATE |
| 05 /12 MON | ||
START TIME 07: 30 PM | |||||
"Set the start time" to set | END | TIME - | |||
CHANNEL | - - | ||||
REC SPEED | - - | ||||
the end time. |
|
|
| ||
|
|
|
| ||
6) Set the channel number |
| ONE TIME PROGRAM | |||
| PROGRAM NUMBER 4 | ||||
|
|
| DATE |
| 05 /12 MON |
Press K or L repeatedly for the | START TIME 07: 30 PM | ||||
END | TIME 08: 30 PM | ||||
desired channel number. Then, | CHANNEL | - - | |||
REC SPEED | - - | ||||
press B.
If you connected the DVD/VCR to a cable box or satellite box as in "DVD/VCR TO TV CONNECTION" on page 14, select the DVD/VCR to channel 3 or 4 the same channel as RF output channel of the DVD/VCR. Then, select the channel you want to record with the cable box or satellite box.
Leave the cable box or satellite box on for timer recording.
7) Set the tape speed |
| ONE TIME PROGRAM | |
|
| PROGRAM NUMBER 4 | |
Press K or L repeatedly for the | DATE | 05 /12 MON | |
START TIME 07: 30 PM | |||
desired tape speed. Then, press B. | END TIME 08: 30 PM | ||
CHANNEL | 16 | ||
REC SPEED SP | |||
SP
SLP
5To set another program, repeat step [4]. To exit, press CLEAR/C.RESET.
6Press TIMER to set the timer.
¡The TIMER light on the VCR comes on. TIMER
RECORDING WILL NOT BE ACTIVATED UNLESS YOU PRESS TIMER.
HINTS FOR TIMER
RECORDING
VCR
¡If there is a power failure or the DVD/VCR is unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.
¡If a tape ends during TIMER RECORDING, the DVD/VCR will stop, eject the tape, and switch to the DVD mode automatically as the TIMER light blinks. (If the DVD power is off, the VCR will become STANDBY status).
¡If a tape is not in the DVD/VCR or does not have a safety tab, the TIMER light flashes and timer recording will not operate. Please insert a recordable tape.
¡When all timer recordings are finished, the TIMER light will flash. To use the DVD/VCR again as usual, press TIMER to disable the flashing TIMER light, then press VCR/TV to select the VCR position. Select either VCR or DVD mode, then continue with the other features as described in this manual.
¡When timer recordings are set, the TIMER light will come on. To use the DVD/VCR as usual until the time for the recording, press TIMER so that TIMER light disappears. Press VCR/TV to choose the VCR posi- tion. Select either VCR or DVD mode, then continue with the other features as described in this manual.
If you want to use the DVD player during a VCR timer recording or while the TIMER light is on or flashes.
¡You can use the DVD player while the TIMER light is on or flashes, or during a timer recording. Press y/I to turn on the DVD player. ;Press DVD on the remote control to choose DVD mode, then continue with the other DVD features as described in this manual. You don’t have to set the TIMER off to use the DVD only.
TO STOP AN AUTOMATIC TIMER PROGRAM ALREADY STARTED
Press STOP/EJECT on the DVD /VCR.
TO CHECK, CORRECT, OR CANCEL AN AUTOMATIC TIMER PROGRAM
1Press TIMER.
¡If the VCR’s power is off, press y/I instead of TIMER, then go on to the next step.
¡If the DVD output mode is selected, you have to switch it to the VCR mode by pressing the VCR on the remote control or the OUTPUT on the VCR.
2Select main menu by pressing MENU.
3Select "TIMER PROGRAMMING" by press- ing K or L. Then, press B.
4Select the program number you want to
check by pressing K or L.
¡The details of the selected program appears on the TV screen.
¡Go to the digit you want to change by pressing Bor s. Then, enter correct numbers by pressing oor p.
¡You may cancel the entire program by pressing s while the program number flashes.
5Press CLEAR/C.RESET to exit.
6Press TIMER to return to timer
English
– 21 – | EN |
1L25