Operating
Using the automatic adjustment feature
1. Press the AUTO button on the remote control.
VIDEO RGB SEARCH
For an RGB signal
ASPECT
The vertical position, the horizontal position, the horizontal phase and the horizontal size will be automatically adjusted. ON
MAGNIFY
And the aspect ratio will be automatically set to default. Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.
For a video signal or s-video signal
The video format best suited for the respective input signal will be selected automatically.
This function is available only when the AUTO mode is selected to the VIDEO FORMAT item in the INPUT menu (
33). For a component video
VLJQDOWKHVLJQDOW\SHLVLGHQWL¿HGDXWRPDWLFDOO\LQGHSHQGHQWO\RIWKLV
function.
For a video signal,
The vertical position, horizontal position and aspect ratio will be automatically set to default.
For a component video signal
The horizontal phase will be automatically set to default.
Ɣ7KHDXWRPDWLFDGMXVWPHQWRSHUDWLRQUHTXLUHVDERXWVHFRQGV$OVRSOHDVH note that it may not function correctly with some input.
Adjusting the position
1. Press the POSITION button on the remote control. The “POSITION” indication will appear on the screen.
2. 8VHWKHFXUVRUEXWWRQVŸźŻŹWRDGMXVWWKHSLFWXUHposition.
OFF |
|
|
FREEZE | MY BUTTON | KEYSTONE |
| 1 | 2 |
POSITION |
| MENU |
When you want to reset the operation, press the RESET button on the remote control during the operation.
To complete this operation, press the POSITION button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.
Ɣ:KHQWKLVIXQFWLRQLVSHUIRUPHGDWDYLGHRVLJQDODFHUWDLQH[WUDVXFKDVDOLQH may appear outside a picture.
20
