Hitachi ED-X12 user manual Setting up, WkhDlu¿Owhu

Setting up

Setting up

WARNING ŹPlace the projector in a stable position horizontally. A fall or a turnover could cause an injury and/or damage to the projector. Then using GDPDJHGSURMHFWRUFRXOGUHVXOWLQD¿UHDQGRUDQHOHFWULFVKRFN

•Do not place the projector on an unstable, slant or vibrant surface such as a wobbly or inclined stand.

•Do not place the projector in the side/front/rear-up position, except cleaning

WKHDLU¿OWHU

Ź3ODFHWKHSURMHFWRULQDFRROSODFHDQGSD\DWWHQWLRQHQRXJKWRYHQWLODWLRQ

7KHKLJKWHPSHUDWXUHRIWKHSURMHFWRUFRXOGFDXVHD¿UHDEXUQDQGRU malfunction to the projector.

•Do not stop up, block and cover the projector's vents.

•Keep a space of 30 cm or more between the sides and other objects such as walls.

•Do not place the projector on a metallic thing or anything weak in heat.

•Do not place the projector on a carpet, cushion or bedding.

•Do not place the projector in direct sunlight or near a hot object such as a heater.

•Put nothing about lens and vents of the projector. Put nothing on the projector.

•Put nothing that is sucked or sticks to the bottom of projector. This projector has some intake vents also on the bottom.

Ź'RQRWSODFHWKHSURMHFWRURQWKHSODFHWKDWJHWVZHW'DPSLQJWKHSURMHFWRU

RULQVHUWLQJOLTXLGLQWKHSURMHFWRUFRXOGFDXVHD¿UHDQHOHFWULFVKRFNDQGRU malfunction to the projector.

•Do not place the projector in a bathroom or the outdoors.

•Put nothing containing the liquid near the projector.

CAUTION Ź$YRLGDVPRN\KXPLGRUGXVW\SODFH3ODFLQJWKHSURMHFWRU LQVXFKSODFHFRXOGFDXVHD¿UHDQHOHFWULFVKRFNDQGRUPDOIXQFWLRQWRWKH projector.

•Do notSODFHWKHSURMHFWRUQHDUDKXPLGL¿HUDVPRNLQJVSDFHRUDNLWFKHQ Ź$GMXVWWKHGLUHFWLRQRIWKHSURMHFWRUWRNHHSWKHOLJKWIURPGLUHFWO\KLWWLQJWKH projector's remote sensor.

7