Hitachi ED-X12 user manual INPUT Menu, Item, Description, Progressive, Video Nr

INPUT Menu

INPUT Menu

With the INPUT menu, the items shown in the table below can be performed.

6HOHFWDQLWHPXVLQJWKHFXUVRUEXWWRQVŸźRQWKH

SURMHFWRURUUHPRWHFRQWURODQGSUHVVWKHFXUVRUEXWWRQŹ on the projector or remote control, or the ENTER button on the remote control to execute the item. Then perform it referring to the following table.

/'07=4)$?	5'.'%6
2+%674'		
	241)4'55+8'68
+/#)'	8+&'104/+&
+0276	%1.1452#%'#761
5'672	%1/210'06%1/210'06
5%4''0	8+&'1(14/#6#761
126+10	(4#/'.1%-	674010
'#5;/'07 4)$+0
	4'51.76+10

Item

Description

	8VLQJWKHEXWWRQVŸźVZLWFKHVWKHSURJUHVVPRGH
	TV Ù FILM Ù TURN OFF
	• This function is performed only for an interlaced signal of a VIDEO
	input, an S-VIDEO input or COMPONENT VIDEO input of 525i (480i)
PROGRESSIVE	or 625i (576i) signal.
	• When TV or FILM is selected, the screen image will be sharp.
	FILM adapts to the 2-3 Pull-Down conversion system. But these
	may cause a certain defect (for example, jagged line) of the picture
	for a quick moving object. In such a case, please select TURN OFF,
	even though the screen image may lose the sharpness.
	8VLQJWKHEXWWRQVŸźVZLWFKHVWKHQRLVHUHGXFWLRQPRGH
	HIGH Ù MID Ù LOW
VIDEO NR	• This function performs only at a VIDEO input, an S-VIDEO or
	COMPONENT VIDEO input of 525i(480i) or 625i(576i) signal.
	• When this function is excessive, it may cause a certain
	degradation of the picture.
	8VLQJWKHEXWWRQVŸźVZLWFKHVWKHPRGHIRUFRORUVSDFH
	AUTO Ù RGB Ù SMPTE240 Ù REC709 Ù REC601

• This item can be selected only for an RGB signal or a component COLOR SPACE video signal (except signals of SCART RGB from the component

video port).

•The AUTO mode automatically selects the optimum mode.

•The AUTO operation may not work well at some signals. In such a case, it might be good to select a suitable mode except AUTO.

32