Hitachi ED-X12 Using the Transition Detector Function, OPTION Menu continued, Item, Description

CHECK PASSWORD

BOX 6TCPUKVKQP&GVGEVQT %1/2.'6'



'06'4 ':+6

PASSWORD BOX

6TCPUKVKQP&GVGEVQT

674010 67401((

Transition Detector

on/off menu

64#05+6+10&'6'%61410

6JGRTQLGEVQTJCUDGGPVTCPUHGTTGF

HTQORTGXKQWUN[KPUVCNNGFRQUKVKQP



2+0$1:



+H[QWYKUJVQJCXGCUSWCTGKOCIG

QPUETGGPCICKP

FKUCDNG6TCPUKVKQP&GVGEVQTQP/GPW

Transition Detector Alarm

OPTION Menu

OPTION Menu (continued)

Item

Description

SECURITY

4. Using the Transition Detector Function

While the Transition Detector function is ON, when power switch is started to supply to the projector, it might react as below.

•Transition Detector alarm shown below might appear on screen, if the projector has been moved or re-installed.

•Transition Detector alarm might appear on screen, if the MIRROR setting has been changed.

•Keystone adjustment feature has been prohibited as long as the Transition Detector function is ON.

4.1 Turning On the Transition Detector Function

4.1-1 8VHWKHŸźEXWWRQVRQWKH6(&85,7<PHQXWR VHOHFW7UDQVLWLRQ'HWHFWRUDQGSUHVVWKHŹRUWKH ENTER button to display the Transition Detector on/off menu. Select TURN ON and the current angle, mirror and keystone setting will be recorded.

NOTE: This feature may not function properly if the projector is not in a stable position when TURN ON is selected.

4.1-2 If this function is set to TURN ON when the vertical angle of the projector, mirror or keystone setting at which the projector is turned on is different than the previously recorded the Transition Detector Alarm will be displayed and the projector will not display the input signal.

Either set the Transition Detector off in the SECURITY menu or set the projector at the recorded angle, mirror and keystone setting to display the input signal.

If the Transition Detector ALARM is displayed for about 5 minutes the lamp will turn off. This function will activate only when the projector is started after the power switch was turned off.

4.2 Setting the Transition Detector PASSWORD

4.2-1	8VHWKHŸźEXWWRQVRQWKH6(&85,7<PHQXWRVHOHFWTransition
	DetectorDQGSUHVVWKHŹRUWKH(17(5EXWWRQWRGLVSOD\WKHTransition
4.2-2	Detector on/off menu.		6TCPUKVKQP&GVGEVQT
	8VHWKHŸźEXWWRQVRQWKH7UDQVLWLRQ'HWHFWRU		'06'42#55914&
	on/off menu to select TURN ON. The ENTER		
	PASSWORD BOX (small) will be displayed.
		37+6		0':6
4.2-3	8VHWKHŸźŻŹEXWWRQVWRHQWHUD3$66:25'	ENTER PASSWORD

Move the cursor to the right side of the ENTER	BOX (small)
	6TCPUKVKQP&GVGEVQT
3$66:25'%2;VPDOODQGSUHVVWKHŹEXWWRQ
	%*'%-2#55914&
to display the CHECK PASSWORD BOX, enter the
	
same PASSWORD again.

4.2-4 Move the cursor to the right side of the CHECK 3$66:25'%2;DQGSUHVVWKHŹEXWWRQWR display the PASSWORD for about 20 seconds, please make note of the PASSWORD during this time. After the PASSWORD has displayed for about 20 seconds the screen will return to the Transition Detector on/off menu.

37+6 0':6

Pressing the ENTER button on the remote controll or the INPUT button on the projector will close the PASSWORD BOX.

NOTE : Please do not forget your Transition Detector PASSWORD.

48