Operating
Freezing the screen
1. Press the FREEZE button on the remote control.
The “FREEZE” indication will appear on the screen, and the projector will enter the FREEZE mode.
To exit the FREEZE mode and restore the screen to normal, press the FREEZE button again.
MAGNIFY | HOME | PAGE UP | VOLUME | |
ON | ||||
|
|
| ||
OFF | END | PAGE DOWN | MUTE | |
|
|
| ||
FREEZE | MY BUTTON | KEYSTONE | ||
| 1 | 2 |
| |
Ɣ7KHSURMHFWRUDXWRPDWLFDOO\H[LWVWKH)5((=(PRGHZKHQWKHLQSXWVLJQDO changes, or when one of the projector’s buttons or the remote control buttons of STANDBY/ON, SEARCH, RGB, VIDEO, BLANK, AUTO, ASPECT, VOLUME, MUTE, KEYSTONE, POSITION, MENU, MAGNIFY and MY BUTTON is pressed.
Ɣ,IWKHSURMHFWRUFRQWLQXHVSURMHFWLQJDVWLOOLPDJHIRUDORQJWLPHWKH/&'SDQHO might possibly be printed. Do not leave the projector in the FREEZE mode for too long.
Temporarily blanking the screen
1. Press the BLANK button on the remote control.
The blank screen will be displayed instead of the screen of
input signal. Please refer to the BLANK item in the SCREEN menu (
37).
| VIDEO RGB | SEARCH |
| |
ASPECT |
| AUTO | BLANK | |
| MAGNIFY | HOME | PAGE UP | VOLUME |
ON |
| |||
|
|
|
| |
To exit the blank screen and return to the input signal screen, press the BLANK button again.
Ɣ7KHSURMHFWRUDXWRPDWLFDOO\UHWXUQVWRWKHLQSXWVLJQDOVFUHHQZKHQRQHRI the projector’s buttons or the remote control buttons is pressed or one of the commands (except get commands) is transmitted from the control port.
22
