Hitachi ED-X3400, ED-X3450 Connecting power supply

Setting up

Connecting power supply

WARNING ►Please use extra caution when connecting the power cord as incorrect or faulty connections may result in ﬁre and/or electrical shock.

•Only use the power cord that came with the projector. If it is damaged, contact your dealer to newly get correct one.

•Only plug the power cord into an outlet rated for use with the power cord's speciﬁed voltage range.

•Never modify the power cord. Never attempt to defeat the ground connection of the three-pronged plug.

AC inlet

Connector of the power cord

1. Connect the connector of the power cord to the AC inlet of the projector.

2. Firmly plug the power cord's plug into the outlet.

Contents

About this manual Contents Projector features Preparations About contents of package Projector Control buttons Remote control Settingup Arrangement Adjusting the projector's elevator About the ﬁlter cover for bottom-upuse Connecting your devices Examples of connection with a computer Connecting to a monitor (output) Connecting to a speaker with ampliﬁer (output) Examples of connection with a VCR/DVD player Connecting power supply Remote control Putting batteries Using the remote control Power on/off Turning on the power Turning off the power Operating Adjusting the volume Temporarily muting the sound Selecting an input signal Searching an input signal Selecting an aspect ratio Adjusting the zoom and focus Using the automatic adjustment feature Adjusting the position Correcting the keystone distortions Using the magnify feature Freezing the screen Temporarily blanking the screen Operating the computer screen Multifunctionalsettings Using the menu function EASY Menu EASY Menu (continued) PICTUREMenu PICTURE Menu (continued) Page IMAGEMenu IMAGE Menu (continued) INPUTMenu INPUT Menu (continued) SETUP Menu SCREEN Menu SCREEN Menu (continued) below Page OPTION Menu OPTION Menu (continued) Maintenance Lamp WARNING Lamp (continued) DT00671 In the case of replacement by yourself Air ﬁlter Other care Related messages Related messages (continued) A note of precaution when cleaning the air ﬁlter Regarding the indicator lamps Regarding the indicator lamps (continued) The cooling fan is not operating There is a possibility that the interior portion has become heated has become overcooled Phenomena that may easily be mistaken for machine defects The electrical power cord is not plugged in The power switch is not set to the on position of these has not been properly ﬁxed Phenomena that may easily be mistaken for machine defects (continued) The lens cover is closed The signal cables are not correctly connected The computer cannot detect the projector as a plug and play monitor Warranty and after-service Speciﬁcations NOTE • This speciﬁcations are subject to change without notice