Multifunctional settings

SETUP Menu

With the SETUP menu, items shown in the table below can be performed.

Select an item using the cursor buttons ▲/▼ on the projector or remote control, and press the cursor button ► on the projector or remote control, or the ENTER button on the remote control to progress. Then perform it referring to the following table.

MENU [RGB]

 

:SELECT

PICTURE

KEYSTONE

+0

IMAGE

WHISPER

NORMAL

INPUT

MIRROR

NORMAL

SETUP

VOLUME

16

SCREEN

 

 

OPTION

 

 

EASY MENU

 

 

Item

Description

 

Using the buttons ▲/▼ corrects the keystone distortion.

 

Upper in the data Lower in the data

 

• The adjustable range of this function will vary with the type of input

 

signal. At some signals, this function may not work well.

KEYSTONE

• When the V:INVERT or the H&V:INVERT is selected under the

 

item MIRROR, if the projector screen is inclined or if the projector is

 

angled downward, this function may not work correctly.

 

• When the zoom adjustment is set to the TELE side, this correction

 

may be excessive. This function should be used with zoom set to

 

WIDE whenever possible.

 

Using the buttons ▲/▼ turns off/on the whisper mode.

WHISPER

NORMAL WHISPER

• When the WHISPER is selected, acoustic noise and screen

 

 

brightness are reduced.

 

Using the buttons ▲/▼ switches the mode for mirror status.

MIRROR

 

 

NORMAL H:INVERT V:INVERT H&V:INVERT

VOLUME

Using the buttons ▲/▼ adjusts the volume.

High Low

 

32