Operating

Operating the computer screen

CAUTION ►Mistaken use of the mouse/keyboard control could damage your equipment.

While using this function, please connect only with a computer.

Before connecting, read the manuals of the computer you will connect.

NOTE • It may not be possible to control notebook PC, and other computers with built-in pointing device (e.g. track ball), using this remote control. In this case, before connecting go into BIOS (system setup) and select external mouse, and disable the pointing device. In addition, the mouse may not function if the computer does not have the needed utility program. See your computer’s hardware manual for details.

The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer’s configurations and mouse drivers.

The USB control can be used only for the functions listed below. You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).

This function is not available while the lamp is warming up (the POWER indicator flashes green), and while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.

USB mouse and keyboard control

1. Connect the projector’s USB port to the computer via the mouse cable.

Available function

Remote control operation

 

 

Move pointer

Use ▲, ▼, ◄, ► buttons

Left click with mouse

Press ENTER button

Right click with mouse

Press RESET button

Press keyboard’s HOME key

Press HOME button

Press keyboard’s END key

Press END button

Press keyboard’s PAGE UP key

Press PAGE UP button

Press keyboard’s PAGE DOWN key

Press PAGE DOWN button

Press keyboard’s ESC key

Press ESC button

21