Operating

Using the automatic adjustment feature

1. Press the AUTO button on the remote control.

STANDBY/ON

VIDEO RGB SEARCH

ASPECT

AUTO BLANK

MAGNIFY HOME PAGE UP VOLUME

At a RGB signal

ON

 

The vertical position, the horizontal position, the clock

 

phase and horizontal size will be automatically adjusted.

 

Make sure that the application window is set to its maximum size prior to attempting to use this feature. A dark picture may still be incorrectly adjusted. Use a bright picture when adjusting.

At a video signal

The video format best suited for the respective input signal will be selected automatically.

This function is available only when the AUTO mode is selected to the item VIDEO FORMAT of the INPUT menu (30). For a component video signal, the signal type is identified automatically independently of this function.

●The automatic adjustment operation requires approximately 10 seconds. Also please note that it may not function correctly with some input.

Adjusting the position

1. Press the POSITION button on the remote control. The “POSITION” indication will appear on the screen.

2. Use the cursor buttons ▲/▼/◄/► to adjust the picture position.

POSITIONMENU

ENTER

When you want to reset the operation, press the RESET button on the remote control during the operation.

To complete this operation, press the POSITION button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

●When this function is performed at a video signal, a certain extra such as a line may appear outside a picture.

Correcting the keystone distortions

ON

1.

Press the KEYSTONE button on the remote control.

END

PAGE DOWN MUTE

OFF

 

 

FREEZE

KEYSTONE

A dialog will appear on the screen to aid you in correcting

 

 

the distortion. 2. Use the cursor buttons ▲/▼ to correct the distortion.

To close the dialog and complete this operation, press the KEYSTONE button again. Even if you don’t do anything, the dialog will automatically disappear after a few seconds.

●This function may not be work well with some input.

●The adjustable range for correcting will vary among inputs.

19