Hitachi HANDYTONE-486 user manual Basic Operations, Get Familiar with Key Pad and Voice Prompt

HandyTone-486 User Manual Grandstream Networks, Inc.

5Basic Operations

5.1Get Familiar with Key Pad and Voice Prompt

HandyTone-486 stores a voice prompt menu (Interactive Voice Response or IVR) for quick browsing and simple configuration. To enter this voice prompt menu, simply press the button on the HandyTone-486 or pick up the phone and dial “***”. The following table shows how to use the voice prompt menu to configure the device.

Menu	Voice Prompt		User’s Options
Main Menu	“Enter a Menu Option”		Enter “*” for the next menu option
			Enter “#” to return to the main menu
			Enter 01 – 06, 47, 86 or 99 Menu option
01	“DHCP Mode”, or		Enter ‘9’ to toggle the selection
	“Static IP Mode”		If user selects “Static IP Mode”, user need
			configure all the IP address information
			through menu 02 to 05. If user selects
			“Dynamic IP Mode”, the device will retrieve
			all IP address information from DHCP server
			automatically when user reboots the device.
02	“IP Address “ + IP address		The current WAN IP address is announced
			Enter 12-digit new IP address if in Static IP
			Mode.
03	“Subnet “ + IP address		Same as Menu option 02
04	“Gateway “ + IP address		Same as Menu option 02
05	“DNS Server “ + IP address		Same as Menu option 02
07	Preferred Vocoder		Enter “9” to go to the next selection in the list:
			- PCM U
			- PCM A
			- G-723
			- G-729
			- iLBC
			- G-726
12	WAN Port Web Access		Enter “9” to toggle between:
			- enable
			- disable
13	Firmware Server IP Address		The current Firmware Server IP address is
			announced. Enter 12 digit new IP address.
14	Configuration Server IP		The current Config Server Path IP address is
	Address		announced. Enter 12 digit new IP address.
15	Upgrade Protocol		Upgrade protocol for firmware and
			configuration update. Enter “9” to toggle
			between:
			- TFTP
			- HTTP
		10

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030