Hitachi HANDYTONE-486 Configuration Guide, Configuring HandyTone-486 through Voice Prompt

HandyTone-486 User Manual Grandstream Networks, Inc.

6Configuration Guide

6.1Configuring HandyTone-486 through Voice Prompt

6.1.1DHCP Mode

Follow section 5.1 with voice menu option 01 to enable HandyTone-486 to use DHCP.

6.1.2STATIC IP Mode

Follow section 5.1 with voice menu option 01 to enable HandyTone-486 to use STATIC IP mode, then use option 02, 03, 04, 05 to set up IP address, Subnet Mask, Gateway, and DNS server respectively.

6.1.3Firmware Server IP Address

Follow section 5.1 with voice menu option 13 to configure the IP address of the firmware server.

6.1.4Configuration Server IP Address

Follow section 5.1 with voice menu option 14 to configure the IP address of the configuration server.

6.1.5Upgrade Protocol

Follow section 5.1 with voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose between TFTP and HTTP.

6.1.6Firmware Upgrade Mode

Follow section 5.1 with voice menu option 17 to choose firmware upgrade mode among the following three options:

-always check

-check when pre/suffix changes

-never upgrade

6.1.7WAN Port Web Access

Follow section 5.1 with voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.

17

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030