Hitachi HANDYTONE-486 user manual Make Phone Calls, Calling phone or extension numbers

Models: HANDYTONE-486

1 45
Download 45 pages 21.78 Kb
Page 11
Image 11

 

HandyTone-486 User Manual

Grandstream Networks, Inc.

 

 

 

 

 

16

Firmware Version

Firmware version information.

 

17

Firmware Upgrade

Firmware upgrade mode. Enter “9” to rotate

 

 

 

 

among the following three options:

 

 

 

 

- always check

 

 

 

 

- check when pre/suffix changes

 

 

 

 

- never upgrade

 

 

47

“Direct IP Calling”

When entered, user will be prompted a dial

 

 

 

 

tone, dial a 12-digit IP address to make a direct

 

 

 

 

IP call.

 

 

 

 

(For details, see “4.2.2 Make a Direct IP

 

 

 

 

Call”.)

 

 

99

“RESET”

Enter “9” to reboot the device; or

 

 

 

 

Enter MAC address to restore factory default

 

 

 

 

setting (For details, see section 8.)

 

 

 

“Invalid Entry”

Automatically returns to Main Menu

 

NOTES:

Once the LED button is pressed, it enters voice prompt main menu. If the button is pressed again while it is already in the voice prompt menu state, it jumps to “Direct IP Calling” option and dial tone plays in this state

“*” shifts down to the next menu option

“#” returns to the main menu

“9” functions as the ENTER key in many cases to confirm an option

All entered digit sequences have known lengths - 2 digits for menu option and 12 digits for IP address. Once all digits are accumulated, the device will automatically process them

For IP address input, omit the dot and enter the digits directly, add 0 for those octets with less than three digits. e.g.: IP: 192.168.1.10, key in: 192168001010

Key entry cannot be deleted but the phone may prompt error once it is detected

5.2Make Phone Calls

5.2.1Calling phone or extension numbers

There are currently two methods to make an extension number call:

a)Dial the numbers directly and wait for 4 seconds (Default “No Key Entry Timeout”). Or

b)Dial the numbers directly, and press # (assuming that “use #” as dial key is selected in web configuration).

Examples:

To dial another extension on the same proxy, such as 1008, simply pick up attached phone, dial 1008 and then press the # or wait for 4 seconds.

To dial a PSTN number such as 6266667890, you might need to enter in some prefix number followed by the phone number. Please check with your VoIP service provider to get the information. If you phone is assigned with a PSTN-like number such as 6265556789, most likely you just follow the

11

VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030

Page 11
Image 11
Hitachi HANDYTONE-486 user manual Make Phone Calls, Calling phone or extension numbers