Note 9. Recoverable error is measured at the nominal condition with voltage, temperature and default error recovery parameters.
Note 10. The drive should be mounted properly (see section 8).
Note 11. MTBF represents a prediction of performance based upon a large statistical sample calculated in accordance with Hitachi's standard procedures.
Hitachi does not warrant that the predicted MTBF is representative of any particular unit or group of units comprising a customer base. The actual failure rates will vary from unit to unit. Surface temperature of HDA is 50°C or less.
A failure defined by MTBF calculation is any event that requires repair or replacement of HDD.
Note 12. Total idle mode power (W) / Total formatted capacity (GB) Note 13. When the Ultrastar
the maximum Logical Block Address is (89B88FF)h.
When the Ultrastar
Note 14. Power measurement values in operating (Random Seek/ Read/ Write) case are
shown in Table 4.3. |
|
|
|
|
Table 3.3 | Power measurement (Operating) | Unit:(W) | ||
|
| Ultrastar | Ultrastar | |
30 IOs per second |
| 13.2 |
| 10.9 |
60 IOs per second |
| 14.5 |
| 12.1 |
90 IOs per second |
| 16.0 |
| 13.6 |
(Measurement conditions:Random Read/Write,Block Length=8,Cache=off)
Drawing No. Sheet No. Revision 5
K6602906 14/46 2003/6/12