Hitachi HUS157336EL3600 Jumper socket setting, Scsi Id Wide Lvd, Option Jumper Connector C3

12.2 Jumper socket setting

The Jumper sockets should be set only when the power is off.

12.2.1SCSI ID WIDE LVD

No.		Option Jumper Connector (C3)	SCSI ID #
0	1	Remove all Jumper Sockets	0
	2	(Default)
1	1	Install the Jumper Socket	1
	2	for C3-7,8
2	1	Install the Jumper Socket	2
	2	for C3-5,6
3	1	Install the Jumper Sockets	3
	2	for C3-5,6 & 7,8
4	1	Install the Jumper Socket	4
	2	for C3-3,4
5	1	Install the Jumper Sockets	5
	2	for C3-3,4 & 7,8
6	1	Install the Jumper Sockets	6
	2	for C3-3,4 & 5,6
7	1	Install the Jumper Sockets	7
	2	for C3-3,4 & 5,6 & 7,8
8	1	Install the Jumper Socket	8
	2	for C3-1,2
9	1	Install the Jumper Sockets	9
	2	for C3-1,2 & 7,8
10	1	Install the Jumper Sockets	10
	2	for C3-1,2 & 5,6
11	1	Install the Jumper Sockets	11
	2	for C3-1,2 & 5,6 & 7,8
12	1	Install the Jumper Sockets	12
	2	for C3-1,2 & 3,4
13	1	Install the Jumper Sockets	13
	2	for C3-1,2 & 3,4 & 7,8
14	1	Install the Jumper Sockets	14
	2	for C3-1,2 & 3,4 & 5,6
15	1	Install the Jumper Sockets	15
	2	for C3-1,2 & 3,4 & 5,6 & 7,8

Note.1 Jumpers are installed at C3-2,4 & 6,8 & 10,12 & 14,16 & 18,20 as spares. Customer can remove and use them for another jumper settings.

Drawing No. Sheet No. Revision 5

K6602906 41/46 2003/6/12