![12.2.3Disable Auto Start](/images/new-backgrounds/105199/10519985x1.webp)
12.2.3Disable Auto Start
WIDE LVD
No. | Option Jumper Connector (C3) | Meaning | |||
1 | Remove the Jumper Socket | Spindle motor automatically | |||
starts when the power is | |||||
| for |
| |||
|
| applied or in sequence via ID | |||
|
|
|
| ||
| 1 | 9 | 23 | number x 10 seconds from the | |
| time power is applied if | ||||
|
|
|
| ||
|
|
|
| ||
| 2 | 10 | 24 |
| |
2 | Install the Jumper Socket | Spindle motor starts only | |||
| for |
| by SCSI command | ||
| 1 | 9 | 23 |
| |
| 2 | 10 | 24 |
|
SCA-2 LVD
No. | Option Jumper Connector (C3) | Meaning | |||
1 | Remove the Jumper Socket | (If AUTO START in SCSI bus | |||
connector (C1) is open,) | |||||
| for |
| |||
|
| Spindle motor automatically | |||
|
|
|
| ||
| 1 | 9 | 23 | starts when the power is | |
| applied or in sequence via ID | ||||
|
|
|
| ||
|
|
|
| number x 10 seconds from the | |
|
|
|
| time power is applied if | |
| 2 | 10 | 24 | ||
| (If AUTO START in SCSI bus | ||||
|
|
|
| ||
|
|
|
| connector (C1) is grounded,) | |
|
|
|
| Spindle motor starts only by | |
|
|
|
| SCSI command. | |
2 | Install the Jumper Socket | Spindle motor starts only by | |||
| for |
| SCSI command regardless of | ||
| 1 | 9 | 23 | AUTO START setting in SCSI | |
| bus connector (C1). | ||||
|
|
|
| ||
| 2 | 10 | 24 |
|
Drawing No. Sheet No. Revision 5 | ||
K6602906 | 43/46 | 2003/6/12 |