To use this product safely (Continued)
Caution
0.2.11Protect the drive against shocks with the corrugated board and cushioning material provided by the manufacturer, or with Hitachi Approved containers.
0.2.12When mounting the drive, use the size of screws and the torque recommended in this manual. If
0.2.13Do not press top cover and bottom PCB of the drive. It may cause catastrophic failures.
0.2.14Read and follow all instructions and cautions described on the top cover of the drive, and in the chapter, Precautions for handling, in this manual.
0.2.15In case of fluctuations in the DC power (spikes, momentary shut off, etc.), the data being recorded or to be recorded from buffer memory are not assured.
0.2.16If you find a smoke or a bad smell generating from the product, stop using it, turn the power off, and see your sales contact.
0.2.17Do not cover the breathing hole on the surface of the drive with use of a seal.
Warranty and Limited Liability
This product is sold with a limited warranty and specific remedies are available to the original purchaser in the event the product fails to conform to the limited warranty. Hitachi’s liability may be further limited in accordance with its sales contact.
In general, Hitachi shall not be responsible for product damages caused by natural disasters, fire, static discharge, misuse, abuse, neglect, improper handling or installation, unauthorized repair, alteration, or accident. In no event will Hitachi be liable for loss of data stored on product.
Hitachi shall not be liable for any special, incidental or consequential damages, even if informed of the possibility thereof in advance.
Please see your sales contact for a complete statement of warranty rights, remedies and limitation of liability.
Drawing No. Sheet No. Revision 5 | ||
K6602906 | 5/46 | 2003/6/12 |
