Hitachi NT 32 AE2(S), NT 50AE2(S) CHANGING THE EXHAUST DIRECTION, USING THE NOSE CAP, Flush, Flush, Too deep, Top cover, Too shallow, Exhaust vent, Turn adjuster, 2Turn adjuster

English

4Connect the air hose.ALWAYS WEAR SAFETY GLASSES.Perform a nailing test.5DISCONNECT AIR HOSE FROM NAILER.6 Choose a suitable position for the adjuster.

NOTE:

●The nail might not drive deep enough if using high pressure with the adjuster set upwards (shallow side) due to factors such as the material hardness or nail type.

If that happens, reduce pressure and set the adjuster to lowest position so the nail drives in at a good position.

Turn adjuster

2

Too deep Flush

2Turn adjusterToo shallow

Flush

CHANGING THE EXHAUST DIRECTION

WARNING

●When changing the exhaust direction, be sure to remove your finger from the trigger and disconnect the air hose from the nailer.

The direction of the exhaust vent can be changed by turning the top cover.

Top cover

Exhaust vent

USING THE NOSE CAP

WARNING

●When detaching or attaching the nose cap, be sure to remove your finger from the trigger and disconnect the air hose from the nailer.

22