English
1.Clearing a jam
Remove a jammed nail in the following order:
1 DISCONNECT AIR HOSE.
2 Remove all nails.
3 Release the lock lever and open guide plate.
4 Remove the jammed nail with a slotted- head screwdriver.
5 Close guide plate and latch.
6 In case of frequent jam, contact a Hitachi authorized service center.
3 |
|
| 1 Disconnect |
Lock lever | air hose |
3 |
|
Guide plate |
|
2. Storing
When not in use for an extended period,
apply a thin coat of the lubricant to the steel parts to avoid rust.
Do not store the Nailer in a cold weather environment.
Keep the Nailer in a warm area.
When not in use, the Nailer should be
stored in a warm and dry place. | Guide plate |
Keep out of reach children. |
|
3. WARNING LABEL
Change the WARNING LABEL if missing or damaged.
A new WARNING LABEL is available from a Hitachi authorized service center.
4. Maintenance chart (See page 25)
5. Operator troubleshooting (See page 26)
6. Service parts list
A:Item No.
B:Code No.
C:No. Used
D:Remarks
CAUTION
Warning label
Repair, modification and inspection of Hitachi Power Tools must be carried out by a Hitachi Authorized Service Center.
This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance.
In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being improved and modified to incorporate the latest technological advancements.
Accordingly, some parts (i.e. code numbers and/or design) may be changed without prior notice.
24