Hitachi NT 65MA4 18

English

MAINTENANCE

NOTE

The information contained in this Manual is designed to assist you in the safe maintenance of the Nailer.

Some illustrations in this Manual may show details or attachments that diﬀer from those on your own Nailer.

MAINTENANCE AND INSPECTION

Read section titled “SAFETY” (pages 4 – 6).

WARNING

●Disconnect air hose and remove all nails from Nailer when:

1)doing maintenance and inspection; and

2)clearing a jam.

1.Clearing a jam

Remove a jammed nail in the following order:

1 DISCONNECT AIR HOSE.

2 Remove all nails.

3 Release the lock lever and open guide plate (A).

Lock lever

5	Close guide plate (A) and latch.
6	In case of frequent jam, contact a
	Hitachi authorized service center.
2. Inspecting the magazine.
1	DISCONNECT AIR HOSE.
2	Clean the magazine. Remove dust
	which may have accumulated in the
	magazine.
3	Lubricate the nail rail with Hitachi

pneumatic tool lubricant.

Nail Rail

1 Disconnect air hose

Guide Plate (A)

4Remove the jammed nail with a slotted- head screwdriver.

3.Storing

○When not in use for an extended period, apply a thin coat of the lubricant to the steel parts to avoid rust.

○Do not store the Nailer in a cold weather environment. Keep the Nailer in a warm area.

○When not in use, the Nailer should be stored in a warm and dry place.

Keep out of reach children.

4.WARNING LABEL

Change the WARNING LABEL if missing or damaged.

A new WARNING LABEL is available from a Hitachi authorized service center.