English
SAFETY
IMPORTANT SAFETY INSTRUCTIONS FOR USING NAILERS
READ ALL INSTRUCTIONS
4. Keep fingers away from trigger when not driving fasteners to avoid accidental firing.
Never carry the Nailer with finger on trigger since you could drive a fastener unintentionally and injure yourself or someone else.
Always carry the Nailer by the handle only.
5. Choice of triggering method is important.
Read and understand section titled “Methods of operation.” (pages 13 – 15)
6. Do not exceed 120 psi. (8.3 bar 8.5 kgf/ cm2)
2.Never use oxygen or other bottled gases. Explosion may occur.
Never use oxygen, combustible gases or any other bottled gases as a power source for the Nailer.
Use of the above gases is
dangerous, as the Nailer will explode.
Use only clean, dry, regulated compressed air.
WARNING
3.Never point tool at yourself or others in work area.
Always assume the Nailer contains fasteners.
Never point the Nailer at yourself toward yourself or others, whether it contains fasteners or not.
If fasteners are mistakenly driven, it can lead to severe injuries.
Never engage in horseplay with the Nailer. Respect the Nailer as a working implement.
Do not exceed m a x i m u m recommended air pressure 120 psi (8.3 bar 8.5 kgf/cm2).
Never connect the Nailer to pressure which potentially exceeds 200 psi (13.7 bar 14 kgf/cm2) as the Nailer can burst.
7. Be careful of the following when using blow nozzle.
1) Do not touch the trigger.
2) Do not point the air outlet at a person.
3) Do not touch the push lever or set it to pushed up status.
Flying nails can cause severe injury.
8. Always wear ear and head protection. Always wear ear protection to protect your ears from loud noise.
Always wear head protection to protect your head from flying objects.
9. Store nailer properly.
When not in use, the Nailer should be stored in a dry place. Keep out of reach of children. Lock the storage area.
10. Keep work area clean.
Cluttered areas invite injuries. Clear all work areas of unnecessary tools, debris, furniture, etc.
4