Hitachi NT 65MA4 20

English

SERVICE AND REPAIRS

WARNING

●Only service personnel trained by Hitachi, distributor or employer shall repair the Nailer.

●Use only parts supplied or recommended by Hitachi for repair.

All quality Nailers will eventually require servicing or replacement of parts because of wear from normal use.

NOTE

Speciﬁcations are subject to change without any obligation on the part of HITACHI.

Maintenance chart

ACTION	WHY	HOW
Drain air line ﬁlter daily.	Prevent accumulation of	Open manual petcock.
Drain air line ﬁlter daily.	moisture and dirt.	Open manual petcock.
	moisture and dirt.
Keep lubricator ﬁlled.	Keep the Nailer lubricated.	Fill with Hitachi pneumatic tool
Keep lubricator ﬁlled.	Keep the Nailer lubricated.	lubricant.
		lubricant.
Clean ﬁlter element — then	Prevent clogging of ﬁlter with	Follow manufacturer’s
blow air through ﬁlter in	Prevent clogging of ﬁlter with	Follow manufacturer’s
direction opposite to	dirt.	instructions.
normal ﬂow.
Clean magazine and feeder	Prevent a jam.	Blow clean daily.
mechanism.	Prevent a jam.	Blow clean daily.
mechanism.
Keep push lever working	Promote operator safety and	Blow clean daily.
properly.	eﬃcient Nailer operation.	Blow clean daily.
properly.	eﬃcient Nailer operation.
Lubricate the Nailer after	Extend the Nailer life.	Supply 5 – 10 drops of
nailing.	Extend the Nailer life.	lubricant into the Nailer.
nailing.		lubricant into the Nailer.
Drain air compressor.	Keep the Nailer operated	Open petcock on air
Drain air compressor.	properly.	compressor tank.
	properly.	compressor tank.