Hitachi SJ-DG Position of Setting Switch, Initial Setting Condition of Printed Board

CHAPTER 4 SETTING
Rotary switch	Dip switch
C O D E	TYPE
4.1 POSITION OF SETTING SWITCH
Figure 4-1shows position of setting switch.PAC, DIV,
BIN, BCD which printed around the dip switch (TYPE)
means one time input , 2 dividing input, binary input, BCD
input.
Figure 4-1 Position of switch

4.2 INITIAL SETTING CONDITION OF PRINTED BOARD

Table 4-2 shows initial setting condition	Table 4-2 Initial setting condition
(Setting condition at shipment).
	Setting item	Switch No.	Initial setting
			condition
		2	PAC (OFF)
		1	BIN (OFF)
4.3 SETTING OF INVERTER	Rotary switch	0 to ￿	0
	CODE

Table 4-3 shows setting items of the inverter (SJ300, L300 series) related to operating SJ-DG.

Make sure to refer to “CHAPTER 3 OPERATION”, “CHAPTER 4 EXPLANATION OF FUNCTION” of the instruction manual of the inverter, and set exactly.

Table 4-3 Table of setting items of inverter related to SJ-DG

Code	Function name		Data range		Initial data	Possible	Possible mode	Note
						setting at	of change at
						operating	operating
	Setting frequency		00(VR)/01(terminal)/02(operator)		02 (SJ300)
A001			/03(RS485)/04(option1)			X	X	-
	destination				00 (L300P)
			/05(option2)
	One selection	of	00(remote)/01(option1)
P031	acceleration	and			00	X	O	-
			/02(option2)
	deceleration time
	Selection of torque		00(4quadrant individual setting)					Only
B040			/01(terminal	switch)/02(analog	00	X	O
	limit							SJ300
			input)/03(option1)/04(option 2)
P032	Selection	of	00(remote)/01(option1)		00	X	O	Only
	position command		/02(option2)					SJ300

(1)In case of setting frequency, make sure to set frequency command destination (A001) to option.

(2)In case of setting acceleration and deceleration time, make sure to set acceleration and deceleration time 1 selection (P031) to option.

(3)In case of setting torque limit, make sure to set torque limit selection (B040) to option.

(4)In case of setting position, make sure to set selection of position command (P032) to option.

4.4INPUT MODE BY DIP SWITCH AND ROTARY SWITCH

6