Hitachi T-19WX How to Take Care of the StarBoard, Consumables, LCD Panel, 3-6English, Appendix

StarBoard T-19WX Appendix

3.3 How to Take Care of the StarBoard

Please clean your StarBoard periodically so it will continue to work for a long time.

(1)Cleaning and care

•Use a dry, soft cloth to clean the StarBoard display surface. Do not use detergents.

•Use a diluted detergent without abrasives to clean the StarBoard cabinet area. Do not use undiluted detergent; rather, mix with water and soak a soft cloth in the mixture. Wring out cloth thoroughly before wiping.

•Be careful not to scratch the StarBoard surface with fingernails or other hard objects. That or bumping the StarBoard can damage it.

•Never use gasoline, thinner, or other solvents. That can cause the cabinet to degenerate and printed areas to peal off.

3.4Consumables

(1)Pen tips for Stylus pen

(2)AAA alkaline dry cell

Enquire at the place of purchase or with technical support for information on how go get replacements.

3.5LCD Panel

(1)Please note that even though the LCD panel is produced using extremely high-precision technology, there may be some dots that are always on or always off, but this is not a malfunction.

(2)The lifespan of the backlight used in the LCD panel is approximately 50,000 hours. The backlight used in the LCD panel has a limited lifespan. Contact technical support if the screen becomes dark, flickers, or will not light up.

3-6English