Press the DISPLAY button a second time to see just the time counter.

Notes:

•The linear time counter operates only if there is something recorded on the tape.

•The counter changes to 0:00:00 when the tape is ejected.

Press the DISPLAY button a third time to see the tape remaining time.

Note: Immediately after the tape is inserted, "-:--" will appear.

2 minutes after playback or recording is started, the tape remaining time is displayed.

Press the CLEAR button repeatedly to switch the type of the tape used. The correct remaining time will appear. AUTO: T-120 or shorter tape

T-160: T-140 or T-160 tape

T-180: T-180 tape

T-210: T-210 tape

Notes:

•The tape remaining time is not displayed correctly for a tape without any recordings or tapes other than T- 30/60/90/120/140/160/180/210.

•The remaining time may not be displayed correctly during fast forwarding or rewinding.

INDEX WITH THE TIME COUNTER

To find specific sections on a tape

Indexing with the Time Counter

You can set the time counter to memorize a certain point in the video programming, and you can return to that point automatically.

1 Press the DISPLAY button two or three times.

The counter will appear in the VCR's display.

2 Begin recording or playing back a tape.