automatically and mark the commercials. "CM SEARCH" will flash in the VCR's display.
• Press the button (2) to cancel the markings.
Note: Do not press buttons during rewinding the tape to mark commercials. To cancel marking during rewinding, press the STOP button. The screen on the right will appear. Press the STOP button again; markings will be cancelled.
RECORDING A PROGRAM -RECORDING TIPS
To watch one program while recording another
1 Once you have set the VCR for recording, press the VCR/TV button.
The VCR indicator disappears. Now, you will be viewing through your TV only.
2 Switch channels using your TV controls or the VCR remote, if it's programmed to control your TV (see page 63).
Notes:
•You can check on the recording by pressing VCR/TV again. This will switch you back to viewing through the VCR, and you'll see the program you are recording.
•If you're hooked up with an audio/video cable: Switch the TV from AUX or VIDEO mode back to the TV mode, then select the channels you want to watch, as described in Step 2. Switch TV back to AUX or VIDEO to monitor your recording.
•You cannot view a DSS program while recording another program.