English
(c)Install the hook and spring on the other side and securely fasten with screw. (Fig. 6)
NOTE:
Pay attention to the spring orientation. Install the spring with larger diameter away from you. (Fig. 8)
1.2Using as an auxiliary light
(1)Press the switch to turn off the light.
If forgotten, the light will turn off automatically after 15 minutes.
(2)The direction of the light can be adjusted within the range of hook positions 1 - 5. (Fig. 9)
Lighting time
AAAA manganese batteries: approx. 15 hrs.
AAAA alkali batteries: approx. 30 hrs.
CAUTION:
●Do not look directly into the light. Such actions could result in eye injury.
Larger diameter faces away
Fig. 8
Switch
Hook
Fig. 9
1.3 Replacing the batteries
(1) | Loosen the hook screw with a |
| screwdriver (No. 1). (Fig. 10) |
| Remove the hook cover by pushing in the direction |
| of the arrow. (Fig. 11) |
(2) | Remove the old batteries and insert the new |
| batteries. Align with the hook indications and |
Hook
Screw
position the plus (+) and minus |
correctly. (Fig. 12) |
(3) Align the indentation in the hook main body with |
the protuberance of the hook cover, press the hook |
cover in the direction opposite to that of the arrow |
shown in Fig. 11 and then tighten the screw. |
Use commercially available AAAA batteries |
(1.5 V). |
NOTE:
Do not tighten the screw excessively. Such action could strip the screw threads.
Fig. 10
Arrow
Hook cover
Fig. 11
Hook main body
CAUTION:
●Failure to observe the following can result in battery leakage, rust or malfunction. Position the plus (+) and minus
Replace both batteries at the same time. Do not mix old and new batteries.
Inden- tation
AAAA batteries 
Protube- rance
Protube- rance
Hook cover
Indentation
Fig. 12
16
