English
Table 1
RECOMMENDED MINIMUM AWG SIZE FOR
EXTENSION CORDS FOR BATTERY CHARGERS
AC Input Rating Amperes* |
| AWG Size of Cord |
| ||
Equal to or | but less | Length of Cord, Feet (Meter) | |||
greater than | than | 25 (7.5) | 50 (15) | 100 (30) | 150 (45) |
0 | 2 | 18 | 18 | 18 | 16 |
2 | 3 | 18 | 18 | 16 | 14 |
3 | 4 | 18 | 18 | 16 | 14 |
*If the input rating of a battery charger is given in watts rather than in amperes, the corresponding ampere rating is to be determined by dividing the wattage rating by the voltage
1250watts
125 volts
9.Do not operate battery charger with damaged cord or
10.Do not operate battery charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman.
11.Do not disassemble battery charger; take it to a qualified serviceman when service or repair is required. Incorrect reassembly may result in a risk of electric shock or fire.
12.To reduce risk of electric shock, unplug charger from receptacle before attempting any maintenance or cleaning. Removing the battery will not reduce this risk.
IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE BATTERY AND BATTERY CHARGER
You must charge the battery before you can use the cordless impact wrench. Before using the model UC14YF2 battery charger, be sure to read all instructions and cautionary statements on it, the battery and in this manual.
REMEMBER: USE ONLY HITACHI BATTERY TYPES EB7 SERIES, EB9 SERIES, EB12 SERIES, EB14 SERIES. OTHER TYPES OF BATTERIES MAY BURST AND CAUSE INJURY!
Follow these instructions to avoid the risk of injury:
WARNING: Improper use of the battery or battery charger can lead to serious injury. To avoid these injuries:
1.NEVER disassemble the battery.
2.NEVER incinerate the battery, even if it is damaged or is completely worn out. The battery can explode in a fire.
3.NEVER
4.NEVER insert any objects into the battery charger’s air vents. Electric shock or damage to the battery charger may result.
8
