Hitachi WirelessIP 5000 user manual Alarm

Chapter 6
Other settings			Alarm
	Setting the alarm function
1		To change the alarm function settings, from the setting menu,
		Select "3. Alarm" using the		keys of the	key,
		then press the key.
2		Up to 3 alarm settings can be registered..

Select "1. Alarm 1", "2. Alarm 2", or "3. Alarm 3" using the keys of the key,

then press the key.

3 Alarm setting information is displayed. ・Setup

・Time ・Ring ・Repeat

To change a setting, Using the key, select “Edit.”

For the setup, select "On" or "Off".

If you select "Off", the setting can be saved, but the alarm does not operate.

Enter the alarm time.

For "Ring", select from "Bell 1" through "Bell 5", Vib.", or "Silent".

For frequency, select from "Once", "Everyday", "Mon-Fri", or "Mon-Sat".

Finally, save with the key.

- 6-9 -