![](/images/new-backgrounds/1328362/32836249x1.webp)
6-6. Cleaning Gun Liner
1 | Head | |
Tube | ||
| ||
| 2 | |
| 3 |
8 mm
Remove nozzle. Cut off wire at contact tip, and remove contact tip and tip adapter.
+−
+−
Open pressure assembly. Retract wire from liner onto spool.
YTurn off welding power source.
1 Nozzle
2 Contact Tip
3 Adapter
.Hold wire tightly to keep it
from unraveling. Secure end of wire at spool.
+−
Remove screws (3) from cover, and remove cover from wire drive assembly.
Tools Needed:
Lay gun cable out straight, | Reassemble drive cover | . Thread wire according to |
and blow out liner. | and gun in reverse order | Section |
| from taking it apart. | |
8 mm |
| |
|
|
804