ELECTRICAL CONNECTIONS
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.
WARNING: APPLIANCES EQUIPPED WITH A FLEXIBLE ELECTRIC SUPPLY CORD ARE PROVIDED WITH A
MODEL | VOLTS | KILOWATTS | PHASE | CIRCUIT | |
| |||||
|
|
|
| (AMPS) | |
|
|
|
|
| |
HCG1 | 120 | 1.75 | 1 | 15 | |
|
|
|
|
| |
HCG2 | 220 | 4 | 1 | 30 | |
|
|
|
|
| |
| 120 | 1.5 | 1 | 15 | |
HCG3 |
|
|
|
| |
220 | 3 | 1 | 15 | ||
| |||||
|
|
|
|
|
NOTE: The grill must be connected to a separate circuit. No other appliances must share the circuit with the grill. If shared the grill may heat more slowly than expected or blow the fuse.
OPERATION
WARNING: THE GRILL AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING OR SERVICING THE GRILL.
BEFORE FIRST USE
GRILL PLATES
The grill is shipped with an application of machine oil on the upper and lower grill plates. This oil will need to be removed prior to the seasoning process (See page 7).
Machine Oil Removal
1.Turn the grill ON (green light will light up) and turn the temperature control knob to 150°F for one minute.
2.Apply a solution of dishwashing liquid and water and wipe the grill plates with a clean, lint free cloth. Be careful water does not drip onto the grill components.
– 6 –
