Hobart HCG3 ML-132002, HCG1 ML-132000, HCG2 ML-132001 Installation Codes and Standards, Assembly

INSTALLATION CODES AND STANDARDS

The Hobart Convenient Grill must be installed in accordance with:

In the United States of America:

1.State and local codes.

2.National Electrical Code, ANSI/NFPA-70 (latest edition). Copies may be obtained from The National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.

In Canada:

1.Local codes.

2.Canadian Electric Code, CSA C22.1 (latest edition). Copies may be obtained from The Canadian Standard Association, 178 Rexdale Blvd., Etobicoke, Ontario, Canada M9W 1R3.

ASSEMBLY

It may be necessary to install the following items.

Drip Tray

Grasp the tray by the black knobs on both ends and ensure the side with the higher lip is to the back. Rotate the tray a quarter turn toward the grill and set the tray into place. Then return the tray to an upright position.

PL-53449

Fig. 1

Spring Protection Cover

Place the cover onto the spring housing and press down until securely in place.

Scraper

Make sure you remove the scraper prior to turning the grill ON. Store the scraper in a convenient location near the grill.

Any shipping paper should be removed and discarded.

– 5 –