Using the Count-Down Mode (Timed Mixing)
1. Turn the SPEED dial to select a mix speed.
a. If the count-up mode was used for the previous batch, the desired time needs to be
entered.
b. If the cou nt-down mode w as used for the previous batc h, the previous time will be
displayed. If a different time is needed, turn the TIME selector to the desired time in
10 second increments.
2. Press the START button to begin mixing; the timer starts counting down from the set time.
a. To stop the mixer at any ti me, press the STO P button. To res ume mixing, press the START
button. For example: The mixer is started at SPEED 1 for 30 seconds and is stopped after
10 se conds. Press ing the START butto n wil l resu me the mixing operat ion.
b. If the mixer is stopped and a new time setting is entered, pressing the START butt on
saves the new time setting on the current speed selection.
For exampl e: T he mixer is started at SPEED 1 for 30 seconds and is stopped afte r 10
seconds. A n ew time is entered by turning the TIME selecto r. Th e new time will replac e
the initial 30 seconds for SPEED 1 after the START button is pressed.
c. If the ti me is changed while mixi ng, the mixe r will opera te unti l the new ti me exp ires.
The adjustment to the time will not be stored.
d. If speed is changed while mixing, the time will change to the previous time for the
selected speed and count down.
NOTE: If the wire cage is opened at any time, the mixing operation will stop. To
resume the mixing operation, close the wire cage and press the START button.
3. When the timer reaches 00:00, the mixer stops; a beeper sounds for 1 second. The count-
down timer then displays the last-stored time.
OPERATINGNO TES
xSTIR is to be used for incorporating ingredients. Do not use it to develop dough
products.
xIf the mixer is stopped during a mixing operation, the timer also stops. The timer starts
again (with the time remaining) when the START button is pressed.
xTurn the TIME selector clockwise to take the mixer out of the hold mode.
Fig. 8
10