Remove and Clean Bowl Guard Wire Cage (Fig. 11 )
1. Rotate wire cage to your left until the three carriersalign with the carrier escape slots in
the circular ridge of the planetary drip cup.
2. Lift the wire cage straight up so the carriers escape fromthe slots on the drip cup. The
bowl guard wire cage can now be removed by pulling toward you.
Escape Slots
(3)
Fig. 11
3. Wash the bowl guard wire cage in a sink, rinse with clear water,and dry with a clean
cloth.
4. The splash guard c an be w iped off and/o r washed with a cloth or spon ge usin g warm,
soapy water. Rinse w ith clea r water and dry with a clean cloth.
Reinstall Bowl Guard Wire Cage
1. Position the ring of the bowl guard wire cage so the carriers are positioned abovethe slots
in the planetary drip cup.
2. Lower the bowl guard wire cage so the carrierspass through the slots.
3. Rotate the bowl guard wire cage to your right until it contacts the stop, closed position.
15