ELECTRICAL CONNECTION
WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES.
Stacked Ovens
The HRTO can be stacked with model HR7 Rotisserie Oven using the stacking kit (purchased separately). Refer to the Stacking Kit Installation Instructions included with the stacking kit. Low profile casters are available as an additional option when stacking ovens under hoods with less than 78" (198.1 cm) clearance.
ELECTRICAL DATA
Model | Volts | Hertz | Phase | Amps | |
|
|
|
|
| |
| 208 | 60 | 1 | 30.1 | |
|
|
|
|
| |
HRTO | 208 | 60 | 3 | 19.9 | |
|
|
|
| ||
240 | 60 | 1 | 27.2 | ||
| |||||
|
|
|
|
| |
| 240 | 60 | 3 | 19.2 | |
|
|
|
|
|
BEFORE FIRST USE
WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW LOCKOUT / TAGOUT PROCEDURES.
The oven must be "burned in" to release any odors that might result from heating new oven surfaces.
1.Clean oven and racks, both inside and outside, with warm soapy water. Refer to "Cleaning" in this manual for further instructions.
2.Rinse thoroughly and wipe dry with a soft clean cloth. Avoid water contact on the quartz infrared heat lamp bulbs.
3.Operate oven at maximum temperature setting of 5 for 45 minutes. Smoke with an unpleasant odor will normally be given off during this
– 5 –
