Hobart ML-132064 manual End Of Day

Models: ML-132064

1 12
Download 12 pages 54.69 Kb
Page 10
Image 10
END OF DAY

END OF DAY

WARNING: DISCONNECT THE ELECTRICAL POWER TO THE MACHINE AND FOLLOW LOCKOUT / TAGOUT PROCEDURES.

CAUTION: Do not spray cleaners on heating coil or lamp bulbs.

CAUTION: Do not use oven cleaners or high-pressure hoses to clean oven.

1.Allow oven to cool.

2.Wash both glass doors with warm, soapy water. Rinse thoroughly and wipe dry with a soft, clean cloth. (A commercial glass cleaner can be used on glass doors if preferred.)

3.With door open, pull inside glass away from door to clean (Fig. 9).

Take extra care when cleaning outside surface of inner glass door, because of its special reflective coating.

Do not remove glass from door.

Fig. 9

4.Clean the control panel with a damp cloth only.

5.Remove wire racks and allow them to soak 15 to 20 minutes in a sink with warm, soapy water or clean in a commercial dishwasher (Fig. 10).

6.Lift out bottom airflow plate in bottom of oven (Fig. 11) and clean in a sink with warm, soapy water or clean in a commercial dishwasher.

Fig. 10

Fig. 11

– 10 –

Page 10
Image 10
Hobart ML-132064 manual End Of Day