Hobart ML-132064 Installation Codes And Standards, In the United States of America, In Canada

INSTALLATION CODES AND STANDARDS

The HRTO Re-Thermalization Oven must be installed in accordance with:

In the United States of America:

1.State and local codes.

2.National Electrical Code, ANSI/NFPA-70 (latest edition). Copies may be obtained from The National Fire Protection Association, Batterymarch Park, Quincy, MA 02269.

In Canada:

1.Local codes.

2.Canadian Electric Code, CSA C22.1 (latest edition). Copies may be obtained from The Canadian Standard Association, 5060 Spectrumway, Suite 100, Mississauga, Ontario, Canada L4W 5N6 (electric equipment).

UNPACKING

Immediately after unpacking, check the oven for possible shipping damage. If the oven is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.

Remove all vinyl paper from the stainless steel surfaces on the interior and exterior of the oven. Remove all tape from the glass and metal surfaces.

ASSEMBLY

The four wire racks must be placed in the oven before using (Fig. 1).

Fig. 1

– 4 –