– 15 –
PROGRAMMED COOKING
In programmed mode, preprogrammed recipes stored in long-term memory are used. Controller
cycles top burners on and off. When cooking partial loads or when cooking special glazes, cook with
one burner on or with a lower Cook Temp setting.
•Controller displays rdy .
•Press . The last operated program displays, for example: r01 .
•Press the up or down keys until the desired recipe number is displayed, for example: r03 .
•To start the selected cooking process, press .
•The display alternates between the program in use, the selected program's Cook Temp setting
and the remaining Cook Time preceded by a c, for example: r03 575° c1:30 . The c in the
display indicates that the cook cycle has started and the timer has begun to count down.
•Press the Temperature switch on (Fig. 30).
•Turn Top Front and Top Rear Burner switches on.
•Check the burners in the top of the cavity (Fig. 31)
to ensure burners are lit and beginning to glow red.
•If one or both top burners do not ignite, turn burner
switch(es) off and on again.
HOLDING
•When the selected recipe's cook time expires and controller beeps, press .
NOTE: Pressing the button when in Hold Mode returns oven to cook cycle for an additional
5 minutes.
•The display alternates between the Hold Temp setting and the elapsed Hold Time preceded by
an h, for example: 200° h0:01 . The h indicates that the Hold cycle has started.
•To stop a Hold cycle, press and hold .
•Controller displays rdy .
READ
START
STOP
PL-41711-1
TOPBURNERS GLOW RED
Fig. 30
Fig. 31
HOLD
TEMP
START
STOP
COOK
TIME
Motor Lights Temperature
Burners
Show Top Front Top Rear
HOBART
Temperature - Time Controller
COOK COOK
TEMP TIME READ
HOLD START
TEMP STOP SAVE
rdy