– 19 –
Add water to the drip pan until the grease has flowed into the skim tube and down through the
drain connection.
For systems plumbed to water line, turn water valve knob on until grease is removed from
the drip pan, then turn water valve off (Fig. 35).
For systems not plumbed to water line, manually add water until grease is removed from the
drip pan.
Close drain valve.
Remove bucket, if used, and dispose of greasy water.
Add a minimum of 1" of water, if necessary, to drip pan and continue cooking.
End of Day
WARNING:DISCONNECT ELECTRICAL POWER BEFORE CLEANING.
CAUTION: Do not use oven cleaners or high-pressure hoses to clean rotisserie oven.
Open hinged doors and allow rotisserie oven to cool. Center shaft retains heat. Allow to cool.
Remove aluminum foil from center shaft.
Remove wire rack, overflow and skim tube and allow them to soak 15 to 20 minutes in a sink
with warm, soapy water or clean in a commercial dishwasher.
Place bucket under drain connection unless connected to a drain and grease trap.
Open drain valve and drain water from drip pan.
The bucket will have to be emptied several times. Do not let the bucket overflow, close drain
valve when bucket is half full and discard water.
Close drain valve. Empty bucket, if used, and place back under drain connection.
Refill drip pan with warm, soapy water.
CAUTION: Do not spray cleaners on ceramic logs or ignitor box.
CAUTION: Do not spray or wipe down top burners.
Wipe down the interior of the rotisserie oven and drums with soapy water from the drip pan using
a sponge or soft cloth. Clean the square holes of the drum, located on the right side of the
rotisserie oven.
CAUTION: Do not use abrasives or razor blades on the glass as they will scratch the surface,
causing it to break without notice.
Clean the hinged glass doors with warm, soapy water, rinse and dry, or use a commercial glass
cleaner. Do not use a scouring pad. Damage to the inside of the door will result.
Clean door handles with warm, soapy water and a clean, soft cloth.
If the rotisserie oven is equipped with the see-through option, remove the glass panels and
clean them with warm, soapy water, rinse and dry, or use a commercial glass cleaner. Do not
use scouring pad. Damage to glass will result. Next, wipe down glass track and replace glass
panels.