World Scale Introduction 1-6
Quick Steps are a handy reference once you have become familiar
with the World Scale and just need a “refresher” on how to
perform a procedure.
QUICK STEPS -
[Procedure Name]
1. PRESS [SAVE]
2. TYPE a PLU…..
They will be in a gray box like the one to the left and will be a
condensed version of the detailed steps. When you need to find a
procedure quickly, look in the Index under Quick Steps for the one
you want.
Refer to the following chapters for information about the World
Scale.
♦ Chapter Two: Getting Started explains the features of the
World Scale, including mechanical functions and gives you
the steps to set up your World Scale, including electrical
specifications.
♦ Chapter Three: Using the World Scale details the procedures
and functions available for scale operation.
♦ Chapter Four: Supervisor Mode explains how to navigate
Supervisor mode and make changes to your World Scale
configuration.
♦ Chapter Five: Maintenance describes how to properly clean
and maintain your scale. It also identifies actions and
solutions for common mistakes and problems.
♦ The Glossary provides definitions of some common terms
used throughout the manual.
♦ The Index provides an alphabetical listing of the topics in this
manual and their corresponding page numbers.