WS-40/80 Hobart Compact Water Softener Installation Instructions - INSTALLATION

Brine Valve Settings

Unit

Brine Setting

Float Cup

Height

 

 

WS-40

1.0 lb.

6.25"

 

 

 

WS-80

1.4 lb.

6.5"

 

 

 

E.Reinstall brine valve into the cabinet.

NOTE: Do not drop brine valve into drum. Dropping may lower float cup, resulting in an improper setting.

20.To install salt alarm system remove paper lining from back of salt alarm connector box.

Fig. 13

21.Remove plastic lining from Velcro® backing located on back of salt alarm controller.

22.Remove four screws securing back cover to salt alarm controller.

Fig. 15

23.Install three (3) AA batteries into salt alarm controller.

NOTE: When installing batteries - be certain to inspect connector to ensure it is secure.

Fig. 16

24.Re-install back cover to salt alarm controller.

25.Using the adhesive backing on both devices - place alarm controller and salt alarm connector box in a position that will allow salt alarm controller to be seen and heard when it is activated.

26.Insert phone cable into salt alarm connector box and salt alarm controller.

Fig. 14

F25404 Rev. A (0413)

 

Page 6 of 10