.A complete Parts List is available at www.HobartWelders.com
7-6. Cleaning Or Replacing Gun Liner
! Disconnect gun from unit.
1 | 2 |
Head Tube
10 mm
Remove liner.
8 mm
Remove nozzle, contact tip, adapter, gas diffuser, and wire outlet guide.
3
Blow out gun casing.
Lay gun cable out straight before installing new liner.
To Reassemble Gun:
Insert new liner.
Install wire outlet guide so that 1/8 in (3 mm) of liner sticks out. Hand tighten outlet guide, and then tighten two full turns more.
Cut liner off so that 3/4 in (19 mm) sticks out of head tube.
Install gas diffuser, adapter, contact tip, and nozzle.
Tools Needed:
8 mm / 10mm
Ref. 802
