Home Automation Digital Whole Home Audio Distribution System All Zones Off, Setting Zone Volume

All Zones Off

If you wish to turn all zones off, press the knob and hold it for 3 - 5 seconds. Release the knob when the display shows "FF". All zone amplifiers are turned off and the volume for each zone is set to "00".

Setting Zone Volume

Turning the knob on the VSC clockwise will increase the volume and counterclockwise will decrease the volume in that zone. The volume is increased and decreased in 5 percent increments from 0-100 percent. The display on the VSC will display the current volume setting. When the zone volume is set to 100 percent, the VSC will display 99.

If the zone is currently muted, turning the knob in either direction turns mute off and audio is heard at the current volume setting. Any subsequent knob turns will increase or decrease the volume from the current volume setting.

Source Selection

To change the audio source in a zone, press down on the knob. The current source number is displayed on the VSC. Press again to cycle through all available audio sources. Each time the button is pressed and then released, the next available source is displayed. If a particular source is not connected, it will not be displayed and you will not have the option of connecting the VSC to that source. Once the last source is reached, pressing down again will bring you back to the first source connected to the system.

If the VSC is displaying the source and there is no interaction with the VSC for 3 seconds, it will revert back to displaying the current volume level.

Zone Menu

To adjust bass, treble, and balance level settings for a zone, press and hold the knob on the zone VSC for 1.5 - 3 seconds to enter the Zone Menu. Release the knob when the display shows "bA".

In the Zone Menu, you can cycle between bass, treble, and balance level by pressing the knob. Each time the button is pressed, the next item is displayed. Zone Menu items are circular; thus, when you are on the last menu item (i.e. Balance) you will switch back to the first menu item (i.e. Bass) by pressing the knob once again. When the item that you want to adjust is displayed, it may be modified by turning the knob clockwise or counterclockwise. The initial values for the bass, treble, and balance are set to 0 and can range from -9 to 9.

Page 3