Controlling RadioRA Units, Page | Home Automation OmniPro II

¾Press 4 (LVL) to set the desired lighting level of the selected unit (0%-100%).

¾5 (RMP) does not affect CentraLite units.

¾Press 9 (TIM) to time the selected unit (On or Off). Timed commands may be from 1-99 seconds, 1-99 minutes or 1-18 hours.

¾Press # (STA) to see the status (On or Off) of a CentraLite device.

Controlling RadioRA Units

Entry Lights

0=OFF 1=ON 2=DIM 3=BRT ↓

Entry Lights

4=LVL 5=RMP 9=TIM #=STA↑

¾Press 0 (OFF) to turn the selected unit off

¾Press 1 (ON) to turn the selected unit on.

¾2 (DIM) does not affect RadioRA units.

¾3 (BRT) does not affect RadioRA units.

¾Press 4 (LVL) to set the desired lighting level of the selected unit (0%-100%).

¾5 (RMP) does not affect RadioRA units.

¾Press 9 (TIM) to time the selected unit (On or Off). Timed commands may be from 1-99 seconds, 1-99 minutes or 1-18 hours.

¾Press # (STA) to see the status (On or Off) of a RadioRA device.

Note: When a RadioRA device transmits a signal (i.e. Switch or Dimmer is turned on or off locally, Mater Control button is pressed, or Phantom Button is executed), OmniPro II will automatically update the status of each affected device.

Controlling ALC or X-10 Units

Entry Lights

0=OFF 1=ON 2=DIM 3=BRT ↓

Entry Lights

4=LVL 5=RMP 9=TIM #=STA↑

¾Press 0 (OFF) to turn the selected unit off.

¾Press 1 (ON) to turn the selected unit on.

¾Press 2 (DIM) to dim the selected unit (1-9 steps, each step is 10% from its current level).

¾Press 3 (BRT) to brighten the selected unit (1-9 steps, each step is 10% from its current level).

¾Press 4 (LVL) to set the desired lighting level of the selected unit (0%-100%).

¾Press 5 (RMP) to ramp the lighting level of an ALC Dimmer Switch to a new level at a selectable ramp rate.

• 5 (RMP) does not affect X-10 units.

¾Press 9 (TIM) to time the selected unit (On or Off). Timed commands may be from 1-99 seconds, 1-99 minutes or 1-18 hours.

¾Press # (STA) to view the current status of the unit.

Page 23

Image 31

Home Automation OmniPro II owner manual Controlling RadioRA Units, Controlling ALC or X-10Units, Page

Contents

Control & Security System HOME AUTOMATION, INCDocument Number 20R00-2Rev. January All Rights Reserved Copyright 2001-2006Home Automation, Inc Contents INTRODUCTIONOVERALL DESCRIPTION SECURITY SYSTEM OPERATION CONTROL TELEPHONE CONTROL SETUP APPENDIX A - DIAL OUT PLANNER UNDERWRITERS LABORATORIES REQUIREMENTSFEDERAL COMMUNICATION COMMISSION NOTICE CANADIAN INDUSTRY CANADA NOTICEPage Underwriters Laboratories UL Listing INTRODUCTIONPage 2- DAY OVERALL DESCRIPTIONConsole Operation 1- OFF 7- CONSOLE LED Normal Top-LevelDisplayDisplay Menus 6- UP ARROW To silence the beeper, press the * key Error BeepsMain Menu Trouble Beeps Confirmation Beep OmniPro II MaintenanceCancel Areas 1 = DAY SECURITY SYSTEM OPERATIONArming the Security System 0 = OFF 4 = VACATION Using Shortcut Keys2 = NIGHT 3 = AWAY Restoring Zones 9 = RESTOREQuick Arm Bypassing Zones #=GOTO What To Do When You Come HomeWhat Happens When the Alarm is Activated Burglar Alarm Activated Page Fire Alarm ActivatedGas Alarm Activated Emergency Keys Police Emergency Duress Code Entered or Duress Alarm ActivatedAlarm Reset Alarm Cancel Page Trouble IndicationsCodes Master Code Manager Code Panic SwitchesDuress Code Area Arming Page GOTO Area Page Testing Your System Page Control CommandsCONTROL About UPB About Rooms When set to UPB, the OmniPro II controller canRoom Controller LED Indicators HAI Lighting Control HLC Format Page About CentraLiteAbout Lutron RadioRA About House Controllers ALC Module Types About ALCAbout House Codes Page Unit NumbersOmniPro II Unit Numbers Module / Output Unit Numbers Controlling a Room of HLC Lighting Configuring Lighting Scenes in an HLC RoomScrolling Through Names Controlling Units Page StepOperation Controlling CentraLite Units Controlling ALC or X-10Units Controlling RadioRA UnitsPage Page Ramp Command ALCScene Command Compose Controlling Compose Units Page Timed CommandsStatus of a Unit Internal Flags All Off Controlling OutputsAll On / Off All Lights On Leviton Scene Control Scene CommandsScene Set Command Scene On Command Activating and Deactivating Links Scene Off CommandSetting a Link Lighting Scenes UPB Links PHANTOM BUTTON 1 0=OFF 1=ON Executing Phantom ButtonsExecuting CentraLite Scenes ENTER BUTTON Dinner for Two Button ButtonsTemperature Control Leave for Work Button Page HAI RC-SeriesThermostats Page Programmable Energy Saver Modules PESMs Page The following control actions are allowed on PESMs Page Freeze AlarmsIMPORTANT NOTES Indoor and Outdoor Temperature Temperature Control of Appliances Temperature AlarmsHumidity Outdoor Temperature Page Configuring HLC DevicesConfiguring HLC Devices using an Omni Console Status Step Operation Setup Mode for HLC DevicesStep Operation Step Operation DEAD - DEAD PHONE LINE ONHK - ON HOOKOFFHK - OFF HOOK RING - RINGING Page THROUGH Show Events Event LogPage Clear Text Messages MessagesRecord Memo Message Play Memo Message Say Message Show MessageLog Message Clear Message ENTER MESSAGE Send Message Pro-LinkSERIAL PORT MSGNAME Remote Phones TELEPHONE CONTROLTelephone Interface In-HousePhones Page Phone Access Denied - Remote LockoutAlternate Method Main Menu 4 - All 1 - Control2 - Security 3 - Button 7 - Events When an HAI Communicating Thermostat is enteredWhen a Programmable Energy Saver PESM is entered 6 - Status Paging and Listening When the HAI Two-WayAudio Module is being used8 - Message Playing and Recording a Message Page 9 - Good-ByePanic Button over the Phone # # # # # # Playing and Recording the Address How the OmniPro II Voice Dialer Works Emergency Dial-OutDigital Dialer Voice Dialer Page PC AccessWhat You Hear - If Your OmniPro II Calls You Entering the Code Page Connecting to Network via PC AccessBuilt-InEthernet Port OmniPro II Ethernet Connections Dynamic DNS Local NetworkPage Page Local / Wide Area Networki.e i.e Authority Level SETUPSet Up Codes Access Areas Page Set Up TimeDuress Code TIME Page Advanced Control Programming ACP1 = Add Programs 2 = Show Programs Page Menu 3 = Delete All Programs Edit ProgramsPage Times Programs Edit Programs WhenPage Button and Event Programs Control Unit / Switch Press Event ButtonsPage UPB 6-ButtonKeypad Corresponding Switch TableSwitch OmniPro Page Zone Event ButtonsAll On/Off Event Buttons UPB Link Event Buttons Page Alarm Event ButtonsX-10Event Buttons Miscellaneous Event Buttons Message Event Buttons Pro-Link Switch Press Event Buttons CentraLitePage Program Control Commands Edit Program CommandPage Program All On / All Off Commands Unit Toggle CommandProgram Security Commands Program Button Commands Program Energy Cost Program Video CommandsProgram Message Commands Program Temperature Commands Program Zone Conditions Edit Program ConditionProgram Control Conditions Program Security Mode Conditions Program Other Conditions Program Time Clock ConditionsPage Answer Outside Call Set Up DialTelephone Access Remote Commands Page Dial Out NumberDial Out Numbers Dial Order Audible Exit Delay Set Up ArmingEntry Delay Exit Delay All On For Alarm Set up MiscellaneousEnable Quick Arm Enable Auto Bypass FORMAT Enable Freeze AlarmFlash For Alarm House Codes 1-16Format Time Clocks House Codes 1-16All OnPage Page Latitude, Longitude, and Time ZoneZONE NAME Daylight Savings DESCRIPTION Controller IP AddressController Port Number NUMBER Encryption Key Set Up NamesPage 4=CODE 5=TEMP 6=AREA 8=MSG↑ Set Up VoiceSet Up Address SET UP VOICE 1=CTRL 2=ZONE 3=BTTN ↓ FIRE ESCAPE PLANNING UNDERWRITERS LABORATORIES REQUIREMENTSPage Page FEDERAL COMMUNICATION COMMISSION NOTICE IF YOU HAVE TROUBLE WITH YOUR PHONES CANADIAN INDUSTRY CANADA NOTICEPage OmniPro II Voice Dial-OutPlanner APPENDIX A - DIAL OUT PLANNERPage Page INSTRUCTIONS TO CALLED PARTY CODE CHAR APPENDIX B - TEXT DESCRIPTION CHARACTER CODESCODE CHAR CODE CHAR CODE APPENDIX C - VOICE DESCRIPTION CODESCODE DESCRIPTION DESCRIPTION CODEDESCRIPTION CODE DESCRIPTION CODEDESCRIPTION CODE CODE NOTES ON CUSTOM PHRASESCODE DESCRIPTIONPage HAI New Orleans, LA U S A NOTE TO INSTALLER