Messages, Record Memo Message, Page | Home Automation OmniPro II

Messages

The Message menu is used to play and record the memo message and to quickly clear all text messages. The memo message is an eight-second voice message. It's like an "electronic notepad" for a family member to leave a handy message. After a message is recorded, it can automatically be played back when someone returns and disarms the security system.

The Message menu is also used to show, log, clear, and send text messages, and to say and phone (dial out) your voice messages.

To enter the Message menu, from the top-level display or from the main menu, press the 8 (MESSAGE) key on the console.

MESSAGE

1=PLAY 2=RECORD 3=CLEAR

8=MESSAGE

↑

Record Memo Message

Note: To Record the memo message using this key, the HAI Two-Way Audio Module (with a microphone) must be installed.

To record a new voice memo message, press the 2 (RECORD) key.

OmniPro II will say, "Record Message". At the beep, record your eight-second message. OmniPro II will beep a second time at the end of the eight seconds, which signifies the end of the record process.

After a new message is recorded, the display will show "CHECK MESSAGE".

Play Memo Message

Note: To Play the memo message using this key, the HAI Two-Way Audio Module (with a speaker) must be installed.

To play the voice message, press the 1 (PLAY) key.

Over the speaker, OmniPro II will say, "Message is" - OmniPro II will then play your eight-second message.

•OmniPro II will automatically play a new memo message when the security system is disarmed.

•After the message has been played, the display will no longer show "CHECK MESSAGE".

Clear Text Messages

If any text messages are currently being displayed on the console, they can be deleted by pressing the 3 (CLEAR) key.

When you press the 3 (CLEAR) key, all messages are cleared from the console display.

Message

To show, log, clear, and send text messages, and to say and phone (dial out) your voice messages, press the 8 (MESSAGE) key:

MESSAGE

1=SHOW 2=LOG 3=CLEAR↓

4=SAY 5=PHONE 6=SEND

↑

Page 41

Image 49

Home Automation OmniPro II owner manual Record Memo Message, Play Memo Message, Clear Text Messages, Page

Contents

Control & Security System HOME AUTOMATION, INCDocument Number 20R00-2Rev. January All Rights Reserved Copyright 2001-2006Home Automation, Inc OVERALL DESCRIPTION INTRODUCTIONSECURITY SYSTEM OPERATION Contents CONTROL TELEPHONE CONTROL SETUP FEDERAL COMMUNICATION COMMISSION NOTICE UNDERWRITERS LABORATORIES REQUIREMENTSCANADIAN INDUSTRY CANADA NOTICE APPENDIX A - DIAL OUT PLANNERPage Underwriters Laboratories UL Listing INTRODUCTIONPage Console Operation OVERALL DESCRIPTION1- OFF 2- DAY Display Menus Normal Top-LevelDisplay6- UP ARROW 7- CONSOLE LED Main Menu Error BeepsTrouble Beeps To silence the beeper, press the * key Cancel OmniPro II MaintenanceAreas Confirmation Beep Arming the Security System SECURITY SYSTEM OPERATION0 = OFF 1 = DAY 2 = NIGHT Using Shortcut Keys3 = AWAY 4 = VACATION Quick Arm 9 = RESTOREBypassing Zones Restoring Zones What Happens When the Alarm is Activated What To Do When You Come HomeBurglar Alarm Activated #=GOTO Gas Alarm Activated Fire Alarm ActivatedEmergency Keys Page Alarm Reset Duress Code Entered or Duress Alarm ActivatedAlarm Cancel Police Emergency Codes Trouble IndicationsMaster Code Page Duress Code Panic SwitchesArea Arming Manager Code Page GOTO Area Page Testing Your System CONTROL Control CommandsAbout UPB Page Room Controller LED Indicators When set to UPB, the OmniPro II controller canHAI Lighting Control HLC Format About Rooms About Lutron RadioRA About CentraLiteAbout House Controllers Page About About ALCHouse Codes ALC Module Types OmniPro II Unit Numbers Unit NumbersModule / Output Unit Numbers Page Scrolling Through Names Configuring Lighting Scenes in an HLC RoomControlling Units Controlling a Room of HLC Lighting Operation StepControlling CentraLite Units Page Controlling ALC or X-10Units Controlling RadioRA UnitsPage Scene Command Compose Ramp Command ALCControlling Compose Units Page Status of a Unit Timed CommandsInternal Flags Page All On / Off Controlling OutputsAll Lights On All Off Scene Set Command Scene CommandsScene On Command Leviton Scene Control Setting a Link Lighting Scenes Scene Off CommandUPB Links Activating and Deactivating Links Executing CentraLite Scenes Executing Phantom ButtonsENTER BUTTON PHANTOM BUTTON 1 0=OFF 1=ON Temperature Control ButtonsLeave for Work Button Dinner for Two Button Page HAI RC-SeriesThermostats Page Programmable Energy Saver Modules PESMs Page The following control actions are allowed on PESMs IMPORTANT NOTES Freeze AlarmsIndoor and Outdoor Temperature Page Humidity Temperature AlarmsOutdoor Temperature Temperature Control of Appliances Configuring HLC Devices using an Omni Console Configuring HLC DevicesStatus Page Step Operation Setup Mode for HLC DevicesStep Operation Step Operation OFFHK - OFF HOOK ONHK - ON HOOKRING - RINGING DEAD - DEAD PHONE LINE Page THROUGH Show Events Event LogPage Record Memo Message MessagesPlay Memo Message Clear Text Messages Log Message Show MessageClear Message Say Message SERIAL PORT Send Message Pro-LinkMSGNAME ENTER MESSAGE Telephone Interface TELEPHONE CONTROLIn-HousePhones Remote Phones Alternate Method Phone Access Denied - Remote LockoutMain Menu Page 2 - Security 1 - Control3 - Button 4 - All When a Programmable Energy Saver PESM is entered When an HAI Communicating Thermostat is entered6 - Status 7 - Events 8 - Message When the HAI Two-WayAudio Module is being usedPlaying and Recording a Message Paging and Listening Panic Button over the Phone # # # # # # 9 - Good-ByePlaying and Recording the Address Page Digital Dialer Emergency Dial-OutVoice Dialer How the OmniPro II Voice Dialer Works What You Hear - If Your OmniPro II Calls You PC AccessEntering the Code Page Built-InEthernet Port Connecting to Network via PC AccessOmniPro II Ethernet Connections Page Dynamic DNS Local NetworkPage i.e Local / Wide Area Networki.e Page Set Up Codes SETUPAccess Areas Authority Level Duress Code Set Up TimeTIME Page 1 = Add Programs Advanced Control Programming ACP2 = Show Programs Page Page Menu 3 = Delete All Programs Edit ProgramsPage Times Programs Edit Programs WhenPage Button and Event Programs Control Unit / Switch Press Event ButtonsPage Switch Corresponding Switch TableOmniPro UPB 6-ButtonKeypad All On/Off Event Buttons Zone Event ButtonsUPB Link Event Buttons Page X-10Event Buttons Alarm Event ButtonsMiscellaneous Event Buttons Page Message Event Buttons Pro-Link Switch Press Event Buttons CentraLitePage Program Control Commands Edit Program CommandPage Program Security Commands Unit Toggle CommandProgram Button Commands Program All On / All Off Commands Program Message Commands Program Video CommandsProgram Temperature Commands Program Energy Cost Program Control Conditions Edit Program ConditionProgram Security Mode Conditions Program Zone Conditions Program Other Conditions Program Time Clock ConditionsPage Telephone Access Set Up DialRemote Commands Answer Outside Call Dial Out Numbers Dial Out NumberDial Order Page Entry Delay Set Up ArmingExit Delay Audible Exit Delay Enable Quick Arm Set up MiscellaneousEnable Auto Bypass All On For Alarm Flash For Alarm Enable Freeze AlarmHouse Codes 1-16Format FORMAT Time Clocks House Codes 1-16All OnPage ZONE NAME Latitude, Longitude, and Time ZoneDaylight Savings Page Controller Port Number Controller IP AddressNUMBER DESCRIPTION Encryption Key Set Up NamesPage Set Up Address Set Up VoiceSET UP VOICE 1=CTRL 2=ZONE 3=BTTN ↓ 4=CODE 5=TEMP 6=AREA 8=MSG↑ FIRE ESCAPE PLANNING UNDERWRITERS LABORATORIES REQUIREMENTSPage Page FEDERAL COMMUNICATION COMMISSION NOTICE IF YOU HAVE TROUBLE WITH YOUR PHONES CANADIAN INDUSTRY CANADA NOTICEPage OmniPro II Voice Dial-OutPlanner APPENDIX A - DIAL OUT PLANNERPage Page INSTRUCTIONS TO CALLED PARTY CODE CHAR APPENDIX B - TEXT DESCRIPTION CHARACTER CODESCODE CHAR CODE CHAR CODE APPENDIX C - VOICE DESCRIPTION CODESDESCRIPTION CODE DESCRIPTION CODECODE DESCRIPTION DESCRIPTION CODECODE DESCRIPTION CODE NOTES ON CUSTOM PHRASESDESCRIPTION CODEPage HAI New Orleans, LA U S A NOTE TO INSTALLER